LAN Manager Workstation/Server

   Introduction:
   -------------
   This document  describes the  procedure  to  setup LAN  Manager  2.1
   Workstation/Server  driver for ISA  Plug&Play  ethernet  adapter.  We
   provide two NDIS drivers. The PNPNDIS.DOS/PNPNDIS.OS2 drivers are normal
   drivers and PNPNDT.DOS are turbo NDIS drivers.  It is highly recommended
   to use the turbo drivers to improve network performance.

   Location of Driver: \NDIS\PNPNDIS.DOS  (for DOS)
                       \NDIS\PNPNDT.DOS   (for DOS)
                       \NDIS\PNPNDIS.OS2  (for OS/2)


   Sample Configuration Files:
   ---------------------------
      CONFIG.SYS (for DOS will contain):

          DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
          REM    For Normal Driver
          DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ISAPNP\PNPNDIS.DOS

          REM    or For Turbo Driver
          DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ISAPNP\PNPNDT.DOS


      CONFIG.SYS (for OS/2 will contain):

          DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
          REM    For Normal Driver
          DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\ISAPNP\PNPNDIS.OS2



      PROTOCOL.INI (will contain):          (For normal driver)

           [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES
           PRIORITY = NETBEUI

           [NETBEUI_XIF]
           Drivername = netbeui$
           SESSIONS = 6
           NCBS = 12
           BINDINGS = "ISAPNP_NIF"
           LANABASE = 0

         [ISAPNP_NIF]
           DriverName = PNPNDIS$
           AdapterID  = @0000B4123456 ;  This item is only required when
                                      ;  more than one ethernet adapters
                                      ;  exist on one system.

      PROTOCOL.INI (will contain):          (For turbo driver)

           [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES
           PRIORITY = NETBEUI

           [NETBEUI_XIF]
           Drivername = netbeui$
           SESSIONS = 6
           NCBS = 12
           BINDINGS = "ISAPNPT_NIF"
           LANABASE = 0

         [ISAPNPT_NIF]
           DriverName = PNPNDT$
           AdapterID  = @0000B4123456 ;  This item is only required when
                                      ;  more than one ethernet adapters
                                      ;  exist on one system.


   Setup Procedures:
   -----------------
      Before  you  start  the installation process,  make sure that the
      adapter  is properly  installed and  configured.  Make  sure  your
      Microsoft LAN Manager is properly installed.

      1. Run the appropriate Microsoft Lan Manager SETUP for computer you
         are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
         item, (this driver isn't included on the Lan Manager disk)  and
         insert this driver diskette, select the ISA PNP driver and follow
         the directions.

      2. When completed, reboot your computer .


   NOTES:
   ------

      1. Parameters for the PROTOCOL.INI file:

         DRIVERNAME: This is the one required parameter. See example at top
                     of this document for syntax.

         AdapterID : This keyword is provided by PNPNDIS, and is  required
                     when  more  than  one  ethernet adapters exist on one
                     system. You must modify the AdapterID value in file,
                     \LANMAN\PROTOCOL.INI, by yourself.