MODEM SETTINGS FOR THE
                  TANDY 300 BAUD INTERNAL MODEM
                        DESKMATE TELECOM


    The August issue of "One Thousand" had a letter from E.J.
Allison of Brea, California regarding the settings for the 300
baud modem and Deskmate's Telecom.  I have found that the Voice
and Computer dialing settings do work and have not tried the Host
mode.

                          VOICE DIALING
                     ----------------------

   DELAY:       2
   SEND:        *C*MG@^\DT
   RECEIVE:     T
   NUMBER
   SEND:        PPX
   RECEIVE:     X
   PAUSE:       2
   SEND:        *


                        COMPUTER DIALING
                     -----------------------

   DELAY:        2
   SEND:         *C*MG@^\DT
   RECEIVE:      T
   NUMBER
   SEND:         X
   RECEIVE:      X
   WAITNC
   WAITC


                        HOST ANSWER MODE
                     -----------------------

   DELAY:        2
   SEND:         *C*M@^\AX
   RECEIVE:      X


                        NOTES OF INTEREST
                     -----------------------

   1) Set the TELECOM STATUS to 7 bits, even parity, 1 stop
bit and XON/XOFF to ON.  (The modem is quirky in that it doesn't
seem to want to be programmed without this.)

   2)  Remember that the AUTO-LOG feature is DUMB.  It will not
work unless you specify "EXACTLY" what it will receive from the
host system.