DMP 206  (260-2906)      1" Skip over Perforation       Faxback Doc. #5867

This function setting, when on, automatically advances the paper to the
next top of form, leaving a one-inch unprinted area at the end of the last
page.  If the owner's manual for your software specifies 1" skip, turn this
function on.

NOTE:  When you turn off the printer, any function setting information
       stored in the buffer is lost.

To enable the 1" skip function:

1)  Set POWER to OFF.

2)  Press and hold ON/OFF LINE while you set POWER to ON.

(smc/jej-05/12/94)