2ND Bin Sheet  (260-2902)       Installation          Faxback Doc. # 6343
Feeder For LP 800

INSTALLING THE 2ND BIN SHEET FEEDER

Follow these steps to install the 2nd Bin Sheet Feeder.

1. To protect your printer and the work area, spread a thick cloth on the
   work area and stand the printer on end with the interface connectors
   facing down.

2. Plug the feeder's connector into the printer.  Then, align the
   feeder's two pins with the holes in the printer's bottom plate and
   attach the feeder to the printer.

WARNING: Be careful not to trap the connector harness or wires between
         the feeder and the printer.

3. Secure the feeder to the printer with the four supplied screws.  Use a
   screwdriver to tighten the screws.

4. Place the printer in its upright position and insert both paper
   cassettes.

5. Open the printer's cover and install the drum counter, cleaning pad,
   and developer block.

NOTE: Press down both green tabs until the developer block clicks into
      place.

6. Reconnect the printer's interface cable and power cord.

(SMC-05/10/94)