2 X 50 Watt Truck Amp  (120-1971)   Connecting Power   Faxback Doc. # 6714

Follow these steps to connect power to the amplifier.

1.  Disconnect the positive (+) wire from your vehicle's battery.  This
    reduces the possibility of damage to your system during
    installation.

    NOTE:  You must reset the clock, the radio's digital tuner
           memories, and other time/memory devices when you
           reconnect the battery wire after wiring is complete.

2.  Connect the amplifier's black (ground) wire to a nearby part of the 
    vehicle's metal frame.

    NOTE:  Many modern vehicle parts are made of plastic or other
           materials that do not conduct electricity.  You must
           connect the black (ground) wire to a metal part that is
           not insulated from the vehicle's frame by one of these
           non-conducting parts.

3.  Connect the red (power) wire directly to the car battery's + 12-volt
    power source.


CONNECTING THE SWITCHED POWER LEAD

Follow these steps to connect the switched power lead.

1.  Connect the supplied orange wire's male quick disconnect plug to
    your car stereo system's switched power output lead.

2.  Connect the orange wire's other end to the amplifier's REM (Remote)
    terminal.  With this connection, the amplifier turns on/off when
    you turn on/off your car stereo system.

(CJD/all-06/29/94)