Stereo Audio  (420-2110)          Installation         Faxback Doc. # 6799
Source Selector

CONNECTING THE AUDIO SELECTOR

Use shielded audio cable with RCA plugs for all connections.  Be sure you
connect left and right channels correctly to maintain proper stereo
separation.

1.  Connect the output jacks of each of your three audio sources (such as
    a CD, VCR, or TV) to your stereo audio source selector's AUX 1, AUX 2.
    and AUX 3 input jacks.

2.  Connect your Audio Source Selector's output jacks to the AUX, CD/AUX,
    OR TV/AUX input jacks of your amplifier/receiver.

USING THE AUDIO SELECTOR

Caution:  To avoid damaging your receiver/amplifier or speakers, set the
          volume control to minimum before changing audio sources.

To select the desired audio source, press the appropriate selector button-
[AUX 1], [AUX 2], or [AUX 3]-on the front panel of your Audio Selector.

Note:  Be sure you select the proper input switch setting on your
       receiver/amplifier.

(LB/all-07/11/94)