Micro-29  (140-1059)            Preparation            Faxback Doc. # 7632

POWER SOURCES

You can power your Micro-29 from internal battery power, AC power, or your
vehicle battery power, see "Optional Power Sources."

INSTALLING BATTERIES

Your microcassette recorder requires 2 AA batteries, such as Radio Shack
Cat. No. 23-552.  You can also use rechargeable nickel-cadmium batteries
(Cat. No. 23-125).

Follow these steps to install the batteries.

1.  Press down on the battery compartment cover and slide it off in the
    direction of the arrow.

2.  Insert the batteries into the compartment as indicated by the polarity
    symbols (+ and -) marked inside the compartment.

3.  Replace the battery compartment cover.

NOTE:  If REC/BATT does not light or lights dimly during manual recording,
       replace or recharge the batteries.

ATTACHING THE WRIST STRAP

Follow these steps to attach the wrist strap.

1.  Insert one end of the wrist strap through the eyelet.

2.  Pull the other end of the wrist strap through the loop at the eyelet.

3.  Pull the wrist strap tight.

(ALL-9/29/94)