TandyFax 1505  (430-1216)             Setup             Faxback Doc. # 8961

Entering Name And Fax Number

The name and fax number (called the "Sender's name" and "Senders number")
are used in several functions which the machine performs.  In particular,
they are printed at the top of each page you transmit.  To give the machine
your name and fax number, press the panel keys as shown in the procedure
below.

Step     Press these keys:     Comments

1        FUNCTION              Enter ENTRY MODE.

1        * * *                 Scroll down to OWN PASSCODE SET.

3        START/COPY            Press START/COPY to select it.

4        5 5 5 1 2 3 4         Enter your fax number with the numeric keys
         (Example)

5        START/COPY            Press START/COPY.

6        ABC  DEF  GHI  WXY    Enter your name.
          2    3    4    9     If you don't want to make
         (Example)             an entry, skip this step.

7        START/COPY            Press START/COPY.

8        STOP                  Press STOP to exit ENTRY MODE.

Using a pencil, write your telephone number in the space provided below the
Rapid key panel.

Caution:

*  Avoid frequent erasure of this number, as eraser particles may enter
   the cracks between the key and the panel, causing key malfunction.  In
   addition, frequent erasure will dull the luster of the panel surface.

*  Do not use writing utensils with hard or sharp tips such as ball-point
   pens.  These may damage the panel surface.

User Switches

User switches are electronic switches located in the micro-circuitry of the
TANDYFAX 1505.  These switches control various aspects of the functioning
of the machine.  Each switch is set at the factory; however, you may want
to change one or more of these settings to better suit your needs.  The
switches are described in the list below, along with their corresponding
settings.

ACCESSING THE SWITCHES

1.  Press the FUNCTION key and "4" to enter USER SWITCH MODE (this will
    appear in the display).

2.  Scroll through the list of switches by pressing "#" to move forward, or
    "*" to move backward.  The switches will appear in the order shown
    below.

3.  When the described switch appears in the display, select the setting.

4.  After the setting is selected, the display will show the next item
    in the list.  You can either make a setting for that item, or press
    STOP to exit USER SWITCH MODE.

SWITCH SETTINGS

Switch 1:  FINE RESOLUTION PRIORITY

The switch is used to change the default resolution for document
transmission from STANDARD to FINE.  Press "1" (YES) to change it to
FINE, or "2" (NO) to change it back to STANDARD.

  *  Factory setting: "2"

Switch 2:  NUMBER OF RINGS TO ANSWER

This sets the number of rings the fax machine waits before answering an
incoming call in automatic reception mode.  Press "1" to select 6 rings, or
or "2" to select 1 ring.

  *  Factory setting: "2"

Switch 3:  RECALL WAIT INTERVAL

This sets the amount of time the machine will wait between automatic
redials when the line is busy.  Press "1" for 1 minute, or "2" for 5
minutes.

  *  Factory setting: "2"

Switch 4:  RECALL TIMES

This sets the maximum number of times the machine will automatically redial
of the line is busy.  Press "1" for 5 times, or "2" for 2 times.

  *  Factory setting: "2"

Switch 5:  6 RINGS MANUAL ANSWER

Press "1" (YES) to have the machine answer a call after 6 rings when it is
in manual reception mode.  Press "2" (NO) to disable the function.

  *  Factory setting: "2"

Switch 7:  TELEPHONE/FAX REMOTE NUMBER

This sets a 1-digit code number which a caller from an answering machine or
touch-tone telephone connected in parallel with the TANDYFAX 1505 can
enter (after entering "*") to make the latter begin fax reception.  Choose
any number from "0" to "9".

  *  Factory setting: "5"

Note:

  *  Activation of fax reception may not be possible from certain types
     of answering machine, or if the distance between the two devices is
     too large.

Switch 8:  TRANSACTION PRINT CONDITION LIST

This sets the condition for printing out Transaction Reports.  Enter a
number from "1" to "4" as follows:

     "1"  (ALWAYS PRINT): Prints out a report after each transmission and
         reception.

     "2"  (ERROR PRINT): Prints out a report only when an error occurs.

     "3"  (SEND ONLY): Prints out a report only after each transmission.

     "4"  (NEVER PRINT): Does not print out any reports.

     *  Factory setting: "2"

Switch 9:  PSEUDO RINGING DURATION

This sets the duration of pseudo ringing when Automatic Fax/Phone
Changeover is enabled.  Enter a number from "1" to "4" as follows:

     "1" (15 SEC.):            15 seconds duration

     "2" (30 SEC.):            30 seconds duration

     "3" (60 SEC.):            60 seconds duration

     "4" (120 SEC.):           120 seconds duration

*  Factory setting: "1"

(smc-03/02/94)